by Updated July 11, 2026
Quick answer: The Serta Perfect Sleeper Elite is a capable medium-feel hybrid for average-weight side and back sleepers. Its pocketed coils, gel-infused foam, and reinforced perimeter make sense for couples and sleepers who dislike the deep hug of an all-foam mattress. My reservations are its retailer-dependent trial terms, relatively limited warranty coverage, and the possibility of early comfort-foam compression.
Serta Perfect Sleeper Elite review verdict
My verdict: The Serta Perfect Sleeper Elite gets the basic hybrid formula right, but I would compare the complete purchase terms before committing. Its individually wrapped coils should provide better motion control than a connected-coil mattress, while the soft upper foams make it more accommodating for side sleeping. The tradeoff is that those comfort foams are also the portion of the construction most likely to soften or develop impressions over time.
I would consider it for an average-weight back or side sleeper who wants a familiar innerspring response with more surface cushioning. I would be cautious if you sleep primarily on your stomach, carry more weight through the middle, or expect unusually long-lasting comfort from a plush foam top.
The Saatva Classic is the alternative I would compare first. According to Saatva’s published policies, it includes a 365-night home trial, lifetime warranty, and white-glove delivery. It also comes in three firmness levels and two heights, which gives shoppers more control over the finished feel.
Check the Saatva Classic offer
“I spent ten years sleeping on a $250 mattress. I told myself it was fine. My back disagreed, every single morning.”
Read why our editor finally switched to Saatva
Serta Perfect Sleeper Elite at a glance
| Category | Serta Perfect Sleeper Elite details |
|---|---|
| Overall assessment | 7.4/10 |
| Typical queen price shown in the reviewed material | From approximately $999 |
| Construction | Hybrid with pocketed coils and gel foam |
| Firmness | Medium, approximately 5/10 |
| Trial | 120 nights through the cited retailer, with terms varying by seller |
| Warranty | 10-year limited manufacturer warranty |
What I like
- The pocketed coil system should transmit less partner movement than an open-coil or Bonnell spring unit.
- Gel-infused foam and airflow through the coil core make more thermal sense than a thick, solid stack of polyurethane foam.
- Foam edge encasement gives the perimeter more structure for sitting and sleeping near the side.
- The medium surface is a reasonable match for many average-weight back and side sleepers.
- The springs preserve some bounce, so changing positions should be easier than it is on slow-recovery memory foam.
What gives me pause
- The 10-year warranty is shorter than the 15 to 20-year coverage described for several direct-to-consumer competitors in the reviewed material.
- Serta’s retail distribution means the trial and return process can depend on the store rather than Serta alone.
- Soft polyurethane comfort layers are normally the first part of this type of mattress to show lasting compression.
- The medium surface can allow too much hip sinkage for some stomach sleepers.
- Shoppers must check the exact sub-model because the Elite name covers more than one comfort configuration.
The Elite remains useful review context, but it is not my first buy-button recommendation. The mattress itself is only part of the decision. The retailer’s return rules, exchange fees, delivery policy, and exact model specification matter just as much.
What to compare before buying
| Comparison type | Mattress or material reference | What it shows |
|---|---|---|
| Primary alternative | Saatva Classic | A responsive coil-based alternative with a 365-night trial and lifetime warranty according to the manufacturer |
| Latex material reference | PlushBeds mattress comparison | Shows how latex constructions differ from the Elite’s polyurethane and memory-foam comfort stack |
| Foam material reference | Amerisleep mattress range | Shows the less springy feel associated with an all-foam support system |
The latex and all-foam listings are useful construction references, but the Saatva Classic is the actual alternative I would put beside the Serta. It stays closer to the Elite’s responsive character while giving shoppers more published choices in firmness and finished height.
Saatva Classic
MattressNut assessment: 9.2/10. The Saatva Classic is the mattress I would check first before buying the Serta Perfect Sleeper Elite. The construction is still responsive and coil-based, but the manufacturer offers more firmness choice and publishes a 365-night trial and lifetime warranty.
Check the Saatva Classic price
The practical decision: The Serta Perfect Sleeper Elite can make sense if you specifically want a Serta mattress, prefer buying through a local retailer, or find favorable sale and return terms. For most shoppers, I would compare its exact configuration against the Saatva Classic first. The important comparison is not just initial softness. It is the complete foam stack, support design, trial process, warranty terms, and expected wear pattern.
What the Serta Perfect Sleeper Elite is made of
The Perfect Sleeper Elite is a hybrid mattress, roughly 13 inches tall depending on the sub-model. That qualification matters because retailers can carry related versions under slightly different names. Ask for the law label or complete specification sheet rather than assuming every mattress with “Elite” in its name has an identical foam stack.
Here is the reviewed construction from top to bottom:
- CoolFeel cover: The surface uses CoolFeel fabric with HeiQ Vblock antimicrobial treatment and polyurethane-foam padding. Serta describes the cover as a cooling contact layer. A cool initial touch can improve the first impression, but the full night’s temperature also depends on the thickness and breathability of the foams underneath.
- Comfort XD foam: This softer polyurethane foam contours around the shoulders and hips. It creates much of the Elite’s plushness compared with the standard Perfect Sleeper. From a durability standpoint, this is one of the layers I would watch because soft comfort foam receives repeated compression every night.
- Gel-infused memory foam: The memory-foam layer adds pressure relief and slows the otherwise springy feel of the coil unit. Serta says its gel infusion helps disperse heat. Gel can influence the foam’s thermal behavior, but it does not make memory foam heat-free.
- Custom Support coil system: The support core contains an 886-count individually wrapped coil unit. Because the springs can move with less direct connection to neighboring coils, this design generally controls motion better than a traditional connected spring system.
- Foam perimeter encasement: A foam rail surrounds the spring unit to stabilize the edge. This expands the usable sleep surface, although edge foam can soften with years of concentrated sitting.
The Elite version adds approximately two extra inches of comfort material and an upgraded cooling cover over the standard Perfect Sleeper described in the original comparison. The fundamental support system remains a pocketed coil core.
That tells me the Elite’s long-term feel will depend heavily on its upper foam layers. Coils can continue providing support even after the surface has softened, but a mattress can still become uncomfortable if the cushioning develops a trough. Warranty coverage and comfortable durability are separate issues.
Coil count alone does not settle the quality question. Spring gauge, zoning, turns, tempering, and the way the unit is joined to the surrounding foam all affect performance. The more immediate concern here is the softer material above the coils, because that is where body impressions are most likely to change how the bed feels.
Comfort and firmness
The standard Perfect Sleeper Elite reviewed here has a medium feel, approximately 5/10. Its quilted surface and XD foam create an immediately cushioned top, while the pocketed coils add enough pushback to keep it from behaving like a deep, slow all-foam bed.
For side sleepers, the useful feature is not softness by itself. The shoulder and hip need enough room to settle without allowing the waist to hang unsupported. The Elite’s combination of conforming foam and individual coils is designed to strike that balance for average-weight sleepers.
Back sleepers should feel more of the coil unit. The foam fills the lumbar gap, while the springs resist broader sinking through the pelvis. Sleepers closer to the upper end of the 130 to 230 lb range may experience the surface as softer because their weight compresses more of the comfort stack.
Stomach sleepers face the opposite problem. A plush upper layer can let the hips settle below the chest, increasing the bend through the lower back. I would start with a firmer construction if the prone position is your main way of sleeping.
The mattress is one-sided and should not be flipped. Its comfort materials are above the spring unit, so turning it over removes the intended cushioning. The maintenance recommendation is to rotate it 180 degrees from head to foot every three to six months. Rotation cannot prevent foam aging, but it can spread repeated pressure across more of the surface.
Do not treat the firmness label as a universal measurement. Retailer-exclusive quilting and foam changes can make two Serta models with similar names feel noticeably different. Your body weight also changes how much of the comfort stack you engage, so the same medium model can feel supportive to one sleeper and overly soft to another.
How the materials affect performance
Motion isolation
The individually wrapped coils are the main reason the Elite should control partner movement better than an old-style connected innerspring. Each spring has more freedom to compress locally, and the foam layers absorb some vibration before it travels across the bed.
I would still expect more bounce than on a pure memory-foam mattress. That is not automatically a flaw. Combination sleepers often prefer some rebound because it prevents the surface from feeling sticky during a position change. Verified owner feedback should be checked for the exact sub-model because thicker pillow tops can feel quieter and less responsive than firmer versions.
Motion isolation also depends on the foundation. A flexible, loose, or poorly supported frame can transmit movement that shoppers blame on the mattress. Check the frame and center support before deciding that the pocketed coil unit is the only source of disturbance.
Edge support
The foam encasement reinforces the outside of the coil unit. It should provide a more stable place to sit while getting dressed and make it easier for couples to use the width of the mattress.
The caveat is material fatigue. A foam rail is not indestructible, and repeated sitting in one spot can soften it. If strong edge support is important for mobility, compare the store model’s edge with the center and ask the retailer how floor-model wear may differ from a new mattress.
Foam encasement creates a different edge feel from reinforced perimeter coils. The rail can feel firm at first, but it may take a permanent set after concentrated use. That matters more to someone who sits on the same side every morning than to a sleeper who only reaches the edge occasionally.
Cooling
The spring core leaves open space for airflow through the lower portion of the mattress. That is a structural advantage over a solid all-foam core. The gel-infused foam and CoolFeel cover are intended to manage heat closer to the sleeper, according to Serta’s product descriptions.
I would describe the overall cooling design as reasonable, not miraculous. A cover may feel cool at first contact, but thick foam can still retain warmth after prolonged contact. Sheets, protectors, room temperature, and body heat all influence the result. Shoppers who sleep very hot should pay attention to the total foam thickness rather than relying on a cooling label alone.
A thick or waterproof mattress protector can also reduce the effect of a cool-touch cover. That does not mean you should skip protection. It means the cooling language should be judged as one part of the full sleep system, not as proof that the mattress will remain cool in every room.
Ease of movement
The coil core gives the Elite more rebound than a slow-recovery memory-foam mattress. That should help combination sleepers turn without fighting a deep body impression. The soft top may still create some resistance, particularly for a lighter sleeper who does not engage the springs as strongly.
This is one reason the exact comfort configuration matters. Adding more plush foam can improve pressure relief, but it also separates the sleeper from the faster response of the coils. A firmer Elite variant should feel easier to move across than a thicker pillow-top version built on a similar support unit.
Noise
Pocketed coils are usually quieter than older interconnected units because the springs are separately wrapped and do not move as one large assembly. Any spring mattress can develop noise as materials loosen, however. The bed frame and foundation should be checked before assuming a squeak comes from the mattress.
Headboard fittings, center legs, slats, and adjustable-base joints can all create sound. Isolating those parts is more useful than assuming every noise means the coil system has failed.
Adjustable base compatibility
Serta lists the Perfect Sleeper Elite as compatible with most adjustable frames. The split king size is not offered in this line, so shoppers planning a split adjustable arrangement should confirm size availability before buying.
Compatibility does not mean every foundation is suitable. The mattress still needs the support specified by Serta and the retailer. Using an incompatible base can affect both performance and warranty eligibility, so I would get that requirement in writing at the point of sale.
Is the Serta Perfect Sleeper Elite good for back pain?
The Elite can be a reasonable starting point for some back and side sleepers with non-specific lower-back discomfort because its medium surface combines pressure relief with spring support. That is not a promise that it will treat pain. Mattress comfort is individual, and persistent or worsening pain should be discussed with a qualified medical professional.
The key construction question is alignment. A back sleeper needs the pelvis supported without leaving an empty space beneath the lumbar region. A side sleeper needs enough shoulder and hip give to keep the spine from bending sideways. The Elite’s foam-over-coil design is intended to address both needs for average-weight sleepers.
For stomach sleepers, I am less enthusiastic. The soft XD foam can compress more beneath the pelvis than beneath the chest, creating an extended lower-back position. A firmer surface is a safer place to begin. Our extra firm mattress guide explains the constructions available in that category.
The reinforced edge may also help people who need a stable surface when getting out of bed. Still, mattress selection should not replace medical assessment, physical therapy, or other care recommended by a clinician.
Pain that appears only after the comfort layers have softened deserves attention. A mattress can continue looking level when unloaded yet allow the pelvis to settle too deeply under body weight. That is why visible sag measurements do not tell the whole comfort story.
Before committing to the Serta: compare the complete trial, return, warranty, and delivery policies with the Saatva Classic. Saatva publishes a 365-night trial, while Serta return terms can vary by retailer.
Who the Serta Perfect Sleeper Elite suits
- Average-weight side sleepers: The XD foam gives the shoulder and hip room to settle, while the pocketed coils resist broad sagging. Sleepers in the stated 130 to 230 lb range are the clearest match for the reviewed medium model.
- Average-weight back sleepers: The coil system provides the underlying support, and the upper foams cushion the pelvis and lumbar area.
- Combination sleepers: The spring response makes position changes easier than they tend to be on thick, slow-moving memory foam.
- Couples: Individually wrapped coils and foam comfort layers should reduce motion transfer while preserving a responsive surface.
- Shoppers who like a traditional mattress feel: The Elite has recognizable innerspring lift with more pressure relief than a basic firm spring mattress.
- People who want to try a mattress in a store: Serta’s broad retailer presence may appeal to shoppers who prefer lying on a display model before ordering.
- Warm sleepers seeking a hybrid: The ventilated spring core gives heat more room to move than a solid foam support core, although the comfort layers can still retain warmth.
The clearest fit is someone who wants surface cushioning without giving up the lift and position-changing ease of springs. That combination is common, but the Elite’s softer foams make weight and sleep position more important than the medium label suggests.
Who should look elsewhere
- Stomach sleepers: The medium, cushioned surface may not keep the pelvis high enough for comfortable prone alignment.
- Sleepers over 250 lbs: The soft comfort layers may compress more deeply and wear faster. A mattress built with firmer, denser comfort materials may provide more consistent support.
- Buyers prioritizing long warranty coverage: The 10-year Serta warranty is shorter than the 15 to 20-year coverage described for competing direct-to-consumer brands in the source material.
- Shoppers who want one brand-managed trial: Trial and return terms depend on the Serta retailer. That can make the buying process less predictable than purchasing from a company handling its own returns.
- People sensitive to foam softening: The Elite’s extra cushioning is one of its attractions, but additional soft foam also creates more material that can compress with use.
- Split adjustable-base owners: The lack of a split king option makes this line unsuitable for that setup.
The Elite is also a questionable fit for shoppers who want a simple specification comparison. Retailer-specific naming can obscure meaningful differences between models. If the seller cannot provide the full model designation and construction details, I would not assume that a favorable review of one Elite configuration applies to another.
Side sleepers comparing pressure-relieving options can use the side sleeper guide as separate category context. That does not change my caution for stomach sleepers, who generally need less compression beneath the pelvis.
Durability and likely wear points
For long-term durability, I focus first on the comfort layers rather than the coil count. Pocketed springs usually retain support reasonably well, but a mattress can feel worn out before its coils fail if the foam above them develops lasting impressions.
Verified owner reviews across retail channels describe good initial comfort, while some owners report sagging or softening in the first few years. These reports do not establish that every Elite will fail early, and retailer listings may combine feedback from related models. They are still worth considering because the plush upper foam receives the most repeated mechanical stress.
Body weight, sleep position, foundation condition, and rotation habits all affect wear. A heavier sleeper or someone who stays in one fixed position places more concentrated load on the same section of foam. Couples may distribute wear more broadly, but they can also create two persistent impressions.
The 10-year limited warranty addresses qualifying defects, not every change in comfort. The reviewed warranty information describes a typical visible-indentation threshold of 1.5 inches. Foam can soften enough to feel less supportive without producing an unloaded indentation that reaches that threshold.
That distinction is crucial. A warranty protects against defined manufacturing defects. It does not mean the mattress should be expected to retain its original firmness or pressure relief for the whole coverage period.
The most vulnerable area is usually the upper comfort stack because it bends, compresses, and warms under the sleeper every night. The coil unit carries the broad load, but it cannot restore resilience once the foam above it has taken a lasting set.
Edge wear follows a different pattern. Sitting concentrates body weight over a narrow strip of foam rather than spreading it across the sleeping surface. If you use the edge for dressing or transferring, vary the spot instead of repeatedly loading one section.
Rotate the mattress 180 degrees every three to six months, keep it on a compatible support system, and avoid repeatedly sitting on the same edge location. Those steps cannot upgrade the foam quality, but they can help distribute normal wear.
Trial, shipping, and warranty details
| Detail | Serta Perfect Sleeper Elite |
|---|---|
| Sleep trial | 120 nights through Mattress Firm in the cited listing; terms vary by retailer |
| Warranty | 10-year limited manufacturer warranty |
| Delivery | Free delivery and white-glove setup may be available through major retailers; verify with the seller |
| Flippable | No, it uses a one-sided construction |
| Shipping format | Compressed bed-in-a-box delivery is listed for the reviewed model |
Read the retailer’s current policy before paying. Ask about exchange fees, pickup charges, required break-in periods, foundation rules, and whether a return produces a refund or store credit. These details come from the seller’s policy and can materially change the value of the purchase.
The same caution applies to delivery. “Free delivery” does not always mean free removal of an old mattress or free setup in every room. Get the service details in writing from the retailer handling the order.
Make sure the receipt identifies the exact model you tried. A similar-looking Serta with a slightly different retailer name may use different quilting or comfort materials. That can complicate both comfort expectations and a later warranty claim.
Keep the law label attached and retain the purchase record. Warranty decisions typically depend on proof of purchase, model identification, mattress condition, and use of an acceptable support system under the written terms.
Related Serta reading: where Serta mattresses are made, our Serta iComfort review, and our explanation of innerspring mattresses.
How I would shop the Serta Perfect Sleeper line
Start with the exact model name and comfort designation. “Perfect Sleeper Elite” identifies a family position, but retailer-specific names can hide meaningful differences in quilting, foam thickness, and firmness. A firm pillow top and a standard medium model should not be treated as interchangeable.
Next, press through the comfort layers and pay attention to how quickly you encounter the spring support. A very thick, soft top may feel luxurious in a showroom but can also create more risk of compression. A slightly firmer version may be the better long-term choice if you are near the upper end of the stated weight range.
Then compare policies, not just sale tags. A lower checkout price can lose its appeal if the retailer charges heavily for an exchange or restricts returns. The mattress, delivery service, trial, and warranty process form one purchase package.
Finally, test your normal sleeping position. Sitting on the edge or lying on your back for a moment does not reveal how the shoulder behaves during side sleeping. Give the materials time to compress, and check whether the pelvis feels supported rather than merely cushioned.
Questions to ask the retailer
- What is the complete model and comfort designation on the law label?
- Does the displayed model have the same construction as the delivered mattress?
- Which company handles a return, exchange, pickup, or warranty inspection?
- Does the trial produce a refund or only store credit under the seller’s written policy?
- What support system does the manufacturer require for warranty eligibility?
- Does delivery include setup, packaging removal, and old-mattress removal?
A salesperson’s description is useful, but the written order and policy control the purchase. If a promise matters to your decision, ask the retailer to show where it appears in the applicable terms.
Reading showroom comfort more carefully
A showroom mattress is not a perfect preview of a new one. Display models have already been compressed by other shoppers, while a newly delivered mattress may initially feel firmer. That difference makes the construction sheet and return terms more valuable than a brief comfort impression alone.
Lie in your usual position long enough for the upper foam to settle. For side sleeping, notice pressure at the shoulder and hip as well as support beneath the waist. For back sleeping, check whether the pelvis feels held up by the coil unit rather than suspended entirely in the soft top.
Pay attention to how much effort it takes to roll or sit up. The Elite is supposed to retain some spring response. If a plush version already feels difficult to move across in the store, it may not suit a combination sleeper who changes positions often.
Test the edge separately from the center. Foam encasement can feel stable while new, but the important question is whether it compresses sharply beneath concentrated weight. A gradual, controlled dip is different from an edge that folds or collapses.
Bottom line on the Serta Perfect Sleeper Elite
The Serta Perfect Sleeper Elite is a competent mid-range hybrid for average-weight back and side sleepers. Its gel foam, pocketed coils, and reinforced perimeter provide a useful mix of cushioning, responsiveness, motion control, and edge stability.
The weaknesses are less about the basic design and more about long-term value. Soft comfort foam can lose resilience, the warranty lasts 10 years, and the trial process is controlled by the retailer. Those concerns become more important for heavier sleepers and buyers choosing a particularly plush sub-model.
If the exact Elite feels right and the retailer offers clear, favorable return terms, it can be a defensible purchase. If you want a longer manufacturer-published trial, more firmness choices, and lifetime warranty coverage, I would compare the Saatva Classic before deciding.
My materials-first view is simple: the coil system is not what worries me most. I would focus on the thickness and softness of the upper foam, because that is the part most likely to change the mattress’s comfort before the springs stop supporting it.
Frequently asked questions
Is the Serta Perfect Sleeper Elite a good mattress?
It is a solid mid-range option for average-weight back and side sleepers who want a traditional hybrid feel, gel-foam cushioning, and better motion control than a connected-coil innerspring. Its main limitations are the 10-year warranty, retailer-dependent trial terms, and the durability questions that accompany soft comfort foam.
What firmness is the Serta Perfect Sleeper Elite?
The standard Elite reviewed here has a medium feel, approximately 5 out of 10. Some sub-models, including the Trelleburg II Firm Pillow Top and Sleep Excellence Firm named in the original material, carry a medium-firm label. Confirm the complete model and comfort designation with the retailer.
Is the Serta Perfect Sleeper Elite flippable?
No. The coils form the base and the comfort foams sit on top. Flipping the mattress places the sleeper against the support side and removes the intended cushioning. Rotate it 180 degrees from head to foot every three to six months to distribute wear.
Does the Serta Perfect Sleeper Elite come in a box?
Yes, the reviewed model is listed as shipping compressed as a bed-in-a-box mattress. The source material recommends allowing several hours for expansion after unpacking. Confirm the delivery format with the retailer because services can vary.
What warranty comes with the Serta Perfect Sleeper Elite?
Serta provides a 10-year limited manufacturer warranty for the reviewed model. It covers qualifying defects and sagging beyond the defined threshold, typically 1.5 inches in the cited terms. Normal softening and comfort changes may not qualify, so read the complete warranty before purchasing.
Is the Serta Perfect Sleeper Elite compatible with an adjustable base?
Yes, Serta describes it as working with most adjustable frames. The split king size is not available in this line, so it will not suit a split adjustable setup.
How long should the Serta Perfect Sleeper Elite last?
There is no single lifespan that applies to every sleeper. The likely wear point is the soft comfort foam rather than the pocketed coil core. Verified owner reviews include reports of early comfort and some reports of sagging before the five-year mark, particularly under heavier or highly concentrated use. Rotation and a suitable foundation may help distribute wear, but they cannot stop foam from gradually softening.
Is the Serta Perfect Sleeper Elite good for couples?
Its individually wrapped coils and foam layers make it a reasonable couples’ mattress. The springs should localize movement better than a connected unit, and the reinforced perimeter lets both sleepers use more of the surface. Very motion-sensitive partners may still prefer the lower bounce of an all-foam mattress.
Is the Elite better than the standard Perfect Sleeper?
The Elite adds approximately two inches of comfort material and an upgraded cooling cover in the construction reviewed here. That can improve pressure relief and create a more finished surface feel. It also places more soft foam above the shared pocketed coil system, so “better” depends on whether you value extra cushioning more than a simpler comfort stack.
Should heavier sleepers buy the Serta Perfect Sleeper Elite?
I would be cautious above 250 lbs, especially with a plush configuration. Greater compression can make the medium surface feel softer and may accelerate wear in the upper foam. A firmer hybrid with more robust comfort materials is generally the safer construction choice.
Why do Serta Perfect Sleeper Elite specifications vary?
Serta sells through multiple retailers, and related mattresses may use retailer-specific model names or comfort configurations. That is why I would verify the complete law-label name, firmness designation, height, and material specification rather than relying on the Elite name alone.
What part of the Elite is most likely to wear first?
The soft polyurethane and memory-foam comfort layers deserve the closest attention. They take direct, repeated compression from the sleeper and can lose firmness before the pocketed coil unit stops providing broad support.
Final recommendation
The Nut’s final take: Buy the Serta Perfect Sleeper Elite only after confirming the exact sub-model and the retailer’s complete return policy. The coil system is sensible, the medium feel should work for many side and back sleepers, and the edge reinforcement is useful. The comfort-foam durability and retailer-controlled trial keep it from being my first recommendation.
The Saatva Classic is the comparison I would make before leaving the page. According to Saatva’s published terms, it provides three firmness choices, two height choices, a 365-night trial, lifetime warranty, and white-glove delivery.
The Serta can work, but weigh its trial, warranty, delivery, and return terms before paying full price. The Elite’s springs are a sound starting point, yet the softer foam and retailer-controlled policies keep the overall value from being as straightforward as the showroom feel suggests.
Review the Saatva Classic offer
For additional site background, visit the MattressNut review archive. My final call remains the same: judge the Serta Perfect Sleeper Elite by its exact foam stack and purchase terms, not by the Elite name alone.