by The Brooklyn Bedding Aurora Luxe is a premium cooling hybrid built around a GlacioTex phase-change cover, copper-infused foam, and zoned pocketed coils. It earns top marks for temperature regulation and pressure relief, especially for side sleepers and hot sleepers. Its 120-night trial and $1,699 queen price are the two biggest drawbacks versus comparable luxury hybrids. If you want a longer trial and a more flexible firmness range, the Saatva Classic is the stronger overall pick.
Saatva Classic
9.2/10
- Dual-coil construction with reinforced lumbar zone pad
- 365-night home trial, longer than most luxury hybrids
- Free white-glove delivery, in-room setup, and old-mattress removal
- Lifetime warranty with no prorated depreciation
- Three firmness levels: Plush Soft, Luxury Firm, Firm
- $99 return fee applies during the trial window
- Heavier than foam or compressed-box mattresses
- Not shipped in a box, requires scheduling a delivery window
The Saatva Classic covers more sleeper types than the Aurora Luxe, runs $300 less at queen, and gives you three times the trial window to decide. For most buyers comparing luxury hybrids, it is the safer long-term bet.
Brooklyn Bedding Aurora Luxe: what we tested
Brooklyn Bedding built the Aurora Luxe around one central claim: it should sleep cooler than any other foam-comfort mattress on the market. The brand backs that up with a four-layer cooling stack, a 14.5-inch profile, and zoned pocketed coils. After running it through NapLab's Scoring System 1.3, the Aurora Luxe earned a 9.18/10 overall, with a near-perfect 10/10 for cooling and 9.2/10 for edge support.
This is a Brooklyn Bedding product, not a brand with a direct affiliate relationship on this site. The review reflects real tested performance data. Where the Aurora Luxe falls short, we say so clearly.
Construction: what is the Aurora Luxe made of?
The Aurora Luxe stacks 14.5 inches total across six layers:
- GlacioTex cooling cover with phase change material (PCM) and cooling gel beads (2.25 inches). This is the primary cooling layer, the one you feel immediately when your hand touches the surface.
- Copper-infused comfort foam (Copperflex), 1.5 inches at 3.5 PCF. Copper conducts heat away from the body; the density keeps it supportive enough not to sag.
- Gel-infused transition polyfoam, 1 inch at 3.0 PCF. A secondary heat-sink layer between the comfort and coil zones.
- Responsive polyfoam, 1 inch at 1.5 PCF. This lighter-density layer provides the quick-response feel that prevents the Aurora Luxe from feeling slow or sluggish.
- Zoned pocketed coils, 8 inches. The coil gauge varies from 13.5 to 16, with reinforced edge coils on both sides of the mattress but not at the head or foot.
- High-density polyfoam base, 0.75 inches at 52 ILD. Foundation layer for the coil system.
The mattress is not flippable. It ships compressed in a box and is compatible with adjustable bed frames. Brooklyn Bedding manufactures it in the United States.
Comfort and firmness
The Aurora Luxe comes in three firmness levels: Soft (4/10), Medium (6/10), and Firm (8/10). NapLab tested the Medium-Firm version, which is the most popular configuration and the one most reviewers recommend for side and combination sleepers.
The comfort feel is responsive, not slow-sinking. The 5.75-inch combined comfort layer gives generous pressure relief, especially at the shoulder and hip, but the quick-response polyfoam keeps you from feeling stuck. The GlacioTex cover has a distinctly cool-to-the-touch sensation that most sleepers notice immediately.
Stomach and back sleepers wanting firmer support should look at the Firm (8/10) version. The Soft model (4/10) works well for lighter side sleepers under 130 pounds but may let heavier sleepers sink too deeply for proper spinal alignment.
Performance: cooling, motion, edge, and feel
Cooling
This is where the Aurora Luxe separates itself. In NapLab testing, the surface measured a maximum of 89.6°F, 0.6 degrees cooler than the average across all hybrid mattresses tested. That number sounds modest, but paired with the cool-to-the-touch feel of the PCM cover, it produces a noticeably cooler surface than gel-foam-only competitors. The copper-infused layers and coil airflow sustain that temperature throughout the night rather than fading after the first hour the way basic gel infusions do. Rated 10/10 for temperature regulation.
Motion isolation
NapLab recorded 8.55 m/s² acceleration range with a motion duration of 0.91 seconds, about 3 percent less motion than the average hybrid. The thick comfort layer absorbs a good share of movement, and the lower bounce from the foam layers helps. Rated 8.4/10. Not as quiet as a pure memory foam mattress, but strong for a hybrid.
Edge support
Sitting sinkage measured 3.50 inches, better than the 3.87-inch average across tested hybrids. The two rows of reinforced edge coils hold the perimeter firm when you sit, stand, or lie near the side of the bed. Rated 9.2/10. One caveat: the edge coils do not run along the head or foot of the mattress, so those areas are softer.
Pressure relief
Rated 10/10 by NapLab. The 5.75-inch comfort stack distributes body weight across a wide surface area, which is especially beneficial at the hip and shoulder for side sleepers. Most back and stomach sleepers on the medium firmness version also reported adequate support without excessive sinkage.
Durability and off-gassing
Brooklyn Bedding mattresses made in the US are known for consistent build quality. The Aurora Luxe carries a lifetime warranty, which is stronger than its 120-night trial window suggests. Off-gassing is notable on first unboxing, with most reviewers reporting 5 to 6 days before the smell dissipated fully.
Who the Aurora Luxe suits best
- Hot sleepers who run warm and want a cooling system that holds through the full night, not just the first 30 minutes.
- Side sleepers in the 130 to 230-pound range who need both pressure relief at the shoulder and hip and enough support to keep the spine aligned.
- Couples where one partner moves frequently and the other sleeps lightly. The 8.4/10 motion isolation is solid for a hybrid.
- Those wanting fiberglass-free construction. Brooklyn Bedding explicitly confirms no fiberglass in the Aurora Luxe.
When to look elsewhere
- If trial length matters. The Aurora Luxe gives you 120 nights. Most of our top alternatives give 100 to 365 nights, with the Saatva Classic at 365. Brooklyn Bedding also charges a $99 return fee, which 75 percent of direct-to-consumer brands do not.
- If you are a strict stomach sleeper over 230 pounds. The medium version may let your hips sink too far. Go with the Firm configuration or consider a coil-dominant hybrid with a firmer support core.
- If you prefer the feel of traditional innerspring. The Aurora Luxe has a foam-forward comfort feel. The Saatva Classic's dual-coil system feels more like a traditional premium hotel mattress.
Sizes and pricing
| Size | Dimensions | Price (retail) |
|---|---|---|
| Twin | 38" x 75" | $999 |
| Twin XL | 38" x 80" | $1,249 |
| Full | 53" x 75" | $1,624 |
| Queen | 60" x 80" | $1,699 |
| King | 76" x 80" | $2,249 |
| Cal King | 72" x 84" | $2,249 |
Brooklyn Bedding runs regular sitewide discount codes. The retail prices above reflect the undiscounted list price. The queen at $1,699 sits about 14 percent above the average hybrid in this category.
Trial, shipping, and warranty
Trial: 120 nights. A $99 return fee applies if you decide to return the mattress within the trial window.
Shipping: The Aurora Luxe ships compressed in a box via standard carrier. Brooklyn Bedding offers white-glove delivery as a paid upgrade through some retailers.
Warranty: Lifetime warranty. No prorated schedule is advertised for the Aurora Luxe specifically, unlike the Signature Hybrid (which prorates from year 11).
The Aurora Luxe is a well-built premium hybrid with best-in-class cooling and strong pressure relief. If temperature regulation is your top priority and you are comfortable with a 120-night trial, it is worth considering. For most buyers who want a longer trial, more firmness flexibility, or a more competitive price point, the Saatva Classic remains a stronger overall pick.
Frequently asked questions
Is the Aurora Luxe mattress good for back pain?
The Medium version provides solid lumbar support through its zoned pocketed coil system and earns a 10/10 pressure-relief score in testing. It works well for most back sleepers under 230 pounds. Those with acute lumbar pain may prefer a mattress with a dedicated lumbar zone pad, like the Saatva Classic.
Does the Aurora Luxe come in a box?
Yes. It ships vacuum-sealed and compressed in a box, expands within a few hours of unboxing. Expect 5 to 6 days for the off-gassing smell to clear.
Is the Aurora Luxe flippable?
No. It is a one-sided mattress with a defined comfort top and support core. Rotating it 180 degrees head-to-foot every 6 months is recommended to even out wear.
Does the Aurora Luxe work with an adjustable bed frame?
Yes. All three firmness versions are compatible with adjustable bases. Brooklyn Bedding confirms this on the product page.
Is the Aurora Luxe made in the USA?
Yes. Brooklyn Bedding manufactures all its mattresses in Phoenix, Arizona.
Saatva Classic
9.2/10
365-night trial, lifetime warranty, free white-glove delivery, three firmness levels, dual-coil lumbar support. The most complete alternative for most Aurora Luxe shoppers.