by The Beautyrest BR800 is an entry-level 12-inch pocketed-coil hybrid with gel foam comfort layers, available around $369-$469 for a queen. It suits side sleepers on a tight budget who want a traditional springy feel, but independent lab testing puts its pressure relief and overall support scores well below average. If you want coil-feel with genuinely better support and durability, the Saatva Classic is the most direct upgrade.
Saatva Classic
9.2/10
- Dual coil-on-coil construction with reinforced lumbar zone pad
- Outstanding edge support and hotel-luxury feel
- Free white-glove delivery, setup and old-mattress removal included
- 365-night trial and lifetime warranty
- Three firmness options: Plush Soft, Luxury Firm, Firm
- Significantly higher price than the BR800
- $99 return fee applies during the trial
- Ships flat, not compressed in a box
If you like the coil feel of the Beautyrest but want proper lumbar support, stronger edge performance, and a mattress that holds up beyond a few years, the Saatva Classic in Luxury Firm is where we consistently land. The price jump is real, but so is the gap in quality.
Check Price at Saatva
Beautyrest BR800 overview
The BR800 is Beautyrest's (Simmons) entry-level hybrid line, pairing gel comfort foam layers with an 800-series pocketed coil core. It targets budget shoppers who want the traditional bouncy, coil feel of an innerspring without spending over $500. Variants include Medium and Firm builds, and you'll find it at Mattress Firm, Amazon, Wayfair and US-Mattress.
This is a mattress that does what its price promises: coil feel, decent edge support, and a familiar bounce. Where it runs into trouble is in the finer points, pressure relief being the main one. With a thin, basic foam stack sitting above the coil unit, the BR800 isn't engineered for spinal alignment in the way a mid-range hybrid is.
Beautyrest BR800 specs
| Spec | Beautyrest BR800 |
|---|---|
| Type | 12-inch hybrid: pocketed coil core with gel/AirCool foam comfort layers |
| Coil unit | 800 Series Pocketed Coil, individually wrapped |
| Comfort layers | ~2 in. AirCool channeled polyfoam + ~1 in. medium comfort polyfoam |
| Cover | DualCool technology fiber (antimicrobial, moisture-wicking) |
| Edge support | BeautyEdge foam encasement on most SKUs |
| Total height | 11.5 in. (Medium Firm) to 12.5 in. (pillow-top variants) |
| Firmness | Medium-Firm (~6/10 on most independent tests) |
| Queen price | ~$369-$469 MSRP; often $449-$529 at retail, lower on clearance |
| Trial | 100 nights |
| Warranty | 10 years (non-prorated) |
| Where sold | Beautyrest.com, Amazon, Wayfair, Mattress Firm, US-Mattress, Costco variants |
| Made in | USA |
Construction and feel
The BR800's coil unit is its strongest suit. The 800-series pocketed coils are individually wrapped, which gives you better motion separation than older open-coil designs, and the BeautyEdge foam perimeter keeps the edges from collapsing when you sit or sleep near the side. For a budget innerspring, the edge support is genuinely usable.
The comfort layer story is thinner. Above the coils you get roughly 2 inches of AirCool channeled polyfoam and a 1-inch medium comfort polyfoam layer. Total comfort stack is around 3 inches, which is modest by current hybrid standards. Independent instrumented testing (NapLab, Sleep Foundation) clocks pressure relief at roughly 6/10, well below the average for mid-range hybrids, with measured sinkage around 3 cm at pressure points. The foam is basic polyurethane rather than memory foam or latex, so contouring and conforming are limited.
Feel is medium-firm with a springy, traditional innerspring response. You ride more on top of the bed than into it. For back and stomach sleepers who need active lumbar support, the thin foam stack doesn't fill that gap the way a zoned or coil-on-coil design would.
Cooling
The DualCool fiber cover uses silver-based antimicrobial treatment and is designed to wick heat and moisture from the surface. The AirCool polyfoam has channels cut through it to improve airflow through the comfort layer, and the tall coil unit underneath naturally ventilates well. Measured surface temperature in testing runs around 91°F with decent dissipation after you get up, which is better than a dense memory foam mattress but unremarkable compared to latex or higher-end hybrid designs.
For a budget coil mattress, cooling is acceptable. Hot sleepers spending significantly more on a mattress should look at mattresses with copper-gel foam or a proper phase-change cover.
Motion isolation
This is where the pocketed coil design helps versus a traditional innerspring, but the thin foam stack limits how much the BR800 can dampen motion. A partner moving in the night will be noticeable, especially compared to an all-foam or thick memory-foam-topped hybrid. It's adequate for couples who aren't particularly sensitive to movement, but it's not a motion isolation standout.
Edge support
The BeautyEdge foam encasement is one of the BR800's genuine strengths. You can sit on the edge without it folding underneath you, and sleeping close to the perimeter doesn't feel like you're about to roll off. For a bed in this price range, the edge performance is solid.
Durability and value
The 10-year warranty is standard for this category. The concern with basic polyurethane foam at thin measurements is impressions over time: budget polyfoams tend to soften and show body impressions more quickly than higher-density foams. If you're looking at the BR800 as a five-plus year mattress, the entry-level foam stack is a genuine risk. At the $399-$469 price point, it's reasonable as a shorter-term purchase or a guest room solution.
The 100-night trial is adequate. Use it seriously: if the mattress isn't working by week eight, initiate the return rather than waiting for the trial to expire.
Who should (and shouldn't) buy the Beautyrest BR800
Good fit:
- Side sleepers under 200 lb who want a traditional springy feel at a low price
- Guest room setups where the mattress sees occasional use
- Short-term use (1-3 years) where budget is the main constraint
- Shoppers who specifically want a coil feel and can't justify spending over $500
Not a great fit:
- Back sleepers who need active lumbar support
- Stomach sleepers, especially anyone over 180 lb
- Heavier sleepers (230 lb+) who will compress the thin foam stack quickly
- Couples where motion isolation is a priority
- Anyone looking for a primary mattress to last 7-10 years
Beautyrest BR800 vs Saatva Classic
Both are coil-based designs, which is where the similarity ends. The Saatva Classic uses a dual coil-on-coil construction: a lower tempered steel coil foundation topped by individually wrapped pocketed coils, with a reinforced lumbar zone pad and a Euro pillow top. The total foam thickness is much greater, the coil count and gauge are higher, and the edge encasement is more robust.
Saatva includes free white-glove delivery with setup and old mattress removal, a 365-night trial (versus the BR800's 100 nights), and a lifetime warranty. The queen runs around $1,395, versus $399-$469 for the BR800. It's a meaningful price difference, but so is the engineering gap. If your budget allows for it, the Saatva Classic is a much stronger long-term investment.
The Beautyrest BR800 is a respectable entry-level coil hybrid for budget-conscious side sleepers who want a traditional springy feel. Its edge support punches above its price, but the thin basic-foam comfort stack limits pressure relief and long-term durability. For a coil mattress that holds its performance over years, the Saatva Classic is the clear upgrade.
Frequently asked questions
Is the Beautyrest BR800 a good mattress?
For its price range, yes, with caveats. The edge support is solid for a budget hybrid, and the pocketed coil unit provides decent motion separation. The weak point is the thin comfort layer: pressure relief and overall support scores land well below average in independent testing, so it's best suited to side sleepers with lighter frames rather than back or stomach sleepers needing active spinal support.
How firm is the Beautyrest BR800?
Independent testing consistently rates the BR800 at around 6 out of 10 on the firmness scale, which is medium-firm. It has a traditional springy feel rather than the contouring sink of memory foam. Most sleepers will feel like they're resting on top of the mattress rather than into it.
How long does the Beautyrest BR800 last?
The 10-year warranty is standard, but the basic polyurethane foam layers are a durability concern. Budget polyfoams in thin measurements tend to develop visible impressions and soften more quickly than higher-density alternatives. Treat it as a 3-5 year mattress for regular use rather than a decade-long investment.
Is the Beautyrest BR800 good for back pain?
Not ideally. Back sleepers with pain typically need active lumbar support, which the BR800's thin foam stack doesn't provide. The coil unit gives some underlying support, but without zoning or a reinforced lumbar layer, the alignment results are inconsistent. Side sleepers with hip pressure tend to fare better on this mattress than back sleepers.
What is the best alternative to the Beautyrest BR800?
If you want to stay with a coil feel but want better support and longevity, the Saatva Classic is our top pick. It uses a dual coil-on-coil construction with a reinforced lumbar zone, comes in three firmness options, includes a 365-night trial and lifetime warranty, and ships with free white-glove delivery. The queen starts around $1,395.