by 
The IKEA Meistervik is a budget firm foam mattress at around $149 queen, best suited for guest rooms, kids' beds, daybeds, and van conversions. Its 4.75-inch polyurethane core gives firm support for back and stomach sleepers at a lightweight price.
IKEA Meistervik
6.4/10
- Very affordable, one of IKEA's lowest price points
- Removable, machine-washable cotton and polyester cover
- Roll-packed, easy to carry through a doorway
- Firm support works well for back and stomach sleepers at lighter body weights
- 4.75-inch height is thin, heavier sleepers may feel the frame beneath
- No dedicated comfort layer, just a single polyurethane foam density throughout
- Sleeps warm, not designed for hot sleepers
- Not compatible with adjustable bases, edge support is minimal
The Meistervik delivers on its one promise: a firm, affordable surface for short-term or secondary sleep situations. It is not the pick for nightly use as a primary mattress, but for a children's trundle, a guest daybed, or a van conversion, the thin profile and low price make it a sensible option.
What is the Meistervik?
The Meistervik is one of IKEA's entry-level foam mattresses, sitting near the bottom of the lineup by price and thickness. It uses a single core of high-resilience polyurethane foam with a rayon and polyester comfort filling layer above it and a removable cotton and polyester cover that zips off for washing. Total thickness is approximately 4.75 inches (12 cm), which IKEA calls a "firm" feel.
It ships roll-packed and needs around 72 hours to fully expand once unpacked. IKEA sells it in Twin, Full, and Queen sizes, with the Queen running around $149 to $199 depending on current pricing. It comes with a 25-year limited warranty, though the coverage terms require regular rotation, a compatible slatted base, and a stain-free condition for claims to be valid.
Who the Meistervik suits
In our testing, the Meistervik works best in specific circumstances rather than as an all-purpose mattress:
- Back and stomach sleepers at average or lighter body weights will find the firm polyfoam supportive without pushing back uncomfortably.
- Children's beds and daybeds are a natural fit. The thin profile and child-safe zipper-free tab design were clearly factored into the construction.
- Guest rooms and temporary setups where the mattress will see occasional rather than nightly use.
- Van conversions and compact builds where the low profile matters more than long-term comfort, and where the ability to cut the foam to size is an advantage.
Side sleepers and anyone over roughly 200 lbs should look elsewhere. The single-density foam does not offer enough give at the hips and shoulders for side sleeping comfort, and the thin core may bottom out under heavier body weight.
Comfort and firmness
The Meistervik sits at roughly 8 out of 10 on the firmness scale, toward the very firm end. The polyurethane core has a springy, resilient feel rather than the slow-response contouring of memory foam. This means you lie on top of the surface more than sinking into it.
The rayon and polyester comfort fill above the foam core adds a modest layer of cushioning but is not thick enough to meaningfully change the overall feel. The result is a surface that prevents hip and shoulder sinkage for back and stomach sleepers but offers limited pressure relief for side sleeping positions.
The best mattresses for side sleepers typically use a softer top comfort layer of at least 2 to 3 inches, something the Meistervik does not have.
Performance
Motion isolation
The all-foam construction does isolate motion reasonably well. Because there are no springs to transfer movement, partners shifting position are less likely to disturb each other compared to a basic innerspring. For a budget product, this is one of its stronger characteristics.
Heat retention
The Meistervik is not designed for hot sleepers. The dense closed-cell polyurethane foam traps body heat, and there is no gel layer, copper infusion, or phase-change material to counteract this. If you run warm at night, this mattress will feel uncomfortable. For hot sleepers, a mattress with open-cell foam or coil airflow is a better choice.
Edge support
Edge support is a known limitation. There is no reinforced edge foam or perimeter coil system, so the sleeping surface compresses significantly near the sides. This reduces the usable sleeping area and makes sitting on the edge of the bed feel unstable.
Durability
Realistic lifespan for the Meistervik as a primary mattress is 4 to 6 years, based on the foam density tier and owner reports. As a guest mattress or occasional-use bed, it will hold up considerably longer. IKEA's 25-year limited warranty is conditional on strict maintenance and use requirements, and most claims for typical body impressions are not covered after the early years.
What the Meistervik is made of
From top to bottom:
- Cover: Removable cotton and polyester ticking with a zipper, machine washable.
- Comfort filling: A thin layer of rayon and polyester fill for surface cushioning.
- Core: High-resilience polyurethane foam, approximately 1.7 lb/ft density. This single layer does all the structural work.
The Meistervik is not flippable. The construction is one-sided, with the comfort filling at the top. Rotating it end-to-end every few months is recommended to even out wear.
Price, trial, and warranty
| Size | Dimensions | Price (approx.) |
|---|---|---|
| Twin | 38 x 75 in | From $149 |
| Full | 53 x 75 in | From $179 |
| Queen | 60 x 80 in | From $199 |
IKEA offers a 365-day return policy on mattresses purchased in-store or online, provided the mattress is in clean, usable condition. There is also a one-time 90-day comfort exchange if the mattress does not suit your needs. Delivery is not included in the price. IKEA stores require in-store pickup or a separate delivery fee for large items.
Adjustable base compatibility
The Meistervik is not designed for use with an adjustable base. The polyurethane foam construction does not flex to accommodate head and foot articulation. A compatible slatted or solid platform frame with slats no more than 3 inches apart is the appropriate base. Using an incompatible foundation can also void the warranty.
The Meistervik is a capable budget foam mattress for specific uses: guest rooms, children's beds, daybed setups, and van conversions. For nightly primary use, the thin profile and limited comfort layers make it a short-term solution rather than a long-term investment. If your budget can stretch further, step up to a mattress with proper comfort and support layers.
Frequently asked questions
Is the Meistervik good for back pain?
For mild occasional use, the firm polyfoam provides some lumbar support for back sleepers at lighter weights. For chronic back pain, the thin profile and single-density construction are not sufficient. A zoned foam mattress or a hybrid with a reinforced lumbar area will do significantly more work. See our best mattresses for back pain guide for tested options.
Does the Meistervik come in a box?
Yes. It ships roll-packed and compressed in a box, making it manageable to carry into a bedroom. IKEA recommends allowing 72 hours for the foam to fully expand before sleeping on it.
Is the Meistervik flippable?
No. The construction is one-sided, with the comfort filling at the top. Flipping it would place the structural foam face-up with no cushioning. Rotating it end-to-end every few months is sufficient.
What IKEA mattress is better than the Meistervik?
Within IKEA's lineup, the HOVAG pocket spring ($499 queen) and HESSTUN ($799 queen) offer significantly better construction with pocketed coil systems.
How long does the Meistervik last?
As a primary nightly mattress, expect 4 to 6 years before body impressions develop. As a guest or occasional-use mattress, it will hold up considerably longer. The foam density is at the low end of the industry range, which limits long-term resilience under regular body weight.